Cognitive impairment related changes in the elemental concentration in the brain of old rat

In order to evaluate the elemental concentration as a function of learning and memory deficiency, six different structures of the brain were analyzed by total reflection X-ray fluorescence spectrometry with synchrotron radiation (SR-TXRF). To evaluate the cognitive processes, the animals were tested in an adaptation of the Morris water maze. After the test, the animals were divided into two groups: cognitively healthy (control group) and cognitively impaired. The measurements were carried out at XRF beam line at Light Synchrotron Brazilian laboratory, Campinas, Brazil. The following elements were identified: Al, P, S, Cl, K, Ca, Ti, Cr, Fe, Cu, Zn, Br and Rb. K concentration was higher in all regions of the brain studied for control group than the cognitively impaired group. Moreover, the control group presented higher levels for P and Fe in the entorhinal cortex, in the temporal cortex (only P), in the hypothalamus and in the thalamus, than the cognitively impaired group. Br concentration in the animals which presented cognitive impairment was three times larger in the hypothalamus and thalamus, twice larger in temporal cortex and higher in visual cortex than the cognitively healthy group. Cu was more remarkable in the hippocampus and hypothalamus from the animals with cognitive impairment than the control group.We observed that the cognitively impaired group presented highest concentrations of Br and Cu in certain areas than the control group, on the other hand, this group presented highest levels of K for all brain areas studied.     

V2O5-WO3/TiO2催化剂氨法SCR脱硝反应动力学研究

In this work, a kinetic study of the selective catalytic reduction of NO with NH3 has been carried out. After proving the operating condition that the effect of intraphase diffusion and interphase mass-transfer processes can be ignored, the selective catalytic reduction of NO with NH3 on the catalytic activity of V2O5-WO3/TiO2 has been carried out with fixing the feed gas flow rate and composition （ NO, NH3, O2 ） while varying the catalyst loading. Based on the experimental results of NO removal efficiency, the empirical catalytic reaction rate equation of NO with NH3 has been obtained using differential analysis. The experimental result is further proved by the graphic integral method at the temperature from 320℃to 400 ℃ The reaction order is 1 to NO and zero to NH3. The reaction follows the Eley-Rideal mechanism model.     

化“材”为“筑”

Chemistry is a central, practical and creative discipline. The development of chemistry plays an important role in the progress of science and society, as well as the improvement of the quality of human life. This paper introduces the chemical knowledge of stone, concrete, glass and other inorganic nonmetallic building materials by the anthropomorphically story. Taking nanomaterials as an example, the prospect of building materials development in the future is put forward.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Catalytic vapor-phase oxidation of 2,2,2-trifluoroethanol

The synthesis of trifluoroacetaldehyde by vapor-phase oxidation of 2,2,2-trifluoroethanol using supported vanadium catalysts was studied. Significant differences were observed in the reaction outcomes resulting from different types of catalysts. The ZrO₂- and Al₂O₃-supported catalyst demonstrated both high catalytic activity and selectivity. The addition of co-catalysts such as MoO₃ or SnO₂ improved catalytic performance (Selectivity: up to 91%; S.T.Y.: >200 g L⁻¹ h⁻¹). The experimental results on catalyst lifetime showed a marked decrease in the activity of the Al₂O₃-supported catalyst within tens of hours, while the ZrO₂-supported catalyst showed little, if any, performance alterations for 2000 h.     

Evaluation of synthesized green carbon catalyst from waste date pits for tertiary butylation of phenol

The present study is intended to adopt a facile method for preparing a sulphonated green carbon catalyst from date pits biomass. Catalyst synthesis involves in situ carbonization and sulphonation and it has been characterized by following techniques such as XRD, SEM, EDX, TEM, FTIR, TGA, and BET. Surface and internal morphology results exhibited that the synthesized sulphonated carbon material possesses a mesoporous structure, while activated carbon possesses a microporous structure. Furthermore, the Fourier transform infrared (FTIR) spectra confirmed the presence of acidic groups (OH, COOH, and SO₃H) in synthesized sulphonated carbon material. Sulphonated carbon material exhibited high acidity (4.7 mmol/g) and good thermal stability. The application of this catalyst for the tertiary butylation of phenol without using any solvent has been investigated. The phenol alkylation reaction showed maximum conversion at reaction condition: temperature (140 °C) with 2 bar (nitrogen gas) pressure with maximum phenol conversion 79.27 wt%, with 68.01% selectivity towards 4TBP+2,4TBP, which is used as an intermediate in antioxidants. The catalyst exhibits comparable catalytic performance up to five reaction cycles. Thus it can be concluded that waste date pits can be successfully employed for green catalyst synthesis and used for reactions involving large molecules.     

Nonlinear vertical accelerations of a floating torus in regular waves

The longitudinal motions and vertical accelerations of a floating torus as well as wave motion inside the torus are studied by model tests in regular deep-water waves. Comparisons are made with linear and partly with second-order potential-flow theory for the smallest examined experimental wave height-to-wave length ratio 1/120. Reasonable agreement is obtained, in particular for the linear problem. The importance of 3D flow, hydroelasticity and strong hydrodynamic frequency dependency is documented. Experimental precision errors and bias errors, for instance, due to tank-wall interference are discussed. Numerical errors due to viscous effects are found to be secondary. Experiments show that the third and fourth harmonic accelerations of the torus matter and cannot be explained by a perturbation method with the wave steepness as a small parameter.     

Viscoelastic response and interlaminar delamination resistance of epoxy/glass fiber/functionalized graphene oxide multi-scale composites

Graphene oxide (GO) was functionalized using three different diamines, namely ethylenediamine (EDA), 4,4′-diaminodiphenyl sulfone (DDS) and p-phenylenediamine (PPD) to reinforce an epoxy/glass fiber (EP/GF) composite laminate, with the aim of improving the overall composite mechanical performance. Different mechanical characterization techniques were used to determine the mechanical performance, including: tensile stress strain, double cantilever beam (DCB) mode-I fracture toughness and dynamic mechanical thermal analysis (DMTA). Scanning electron microscopy (SEM) was used to support the results and conclusions. The results demonstrated remarkable enhancements in the mechanical performance of EP/GF composite laminates by incorporation of functionalized graphene oxide (FGO) nanofiller, whilst the mechanical performance of the GO reinforced composite only improved marginally. Finally, the mechanical performance of the EP/GF/FGO multi-scale composites was found to be dependent on the type of FGO functional groups; of which EDA exhibited the highest performance. These investigations confirmed that the EDA-FGO-reinforced EP/GF composites possess excellent potential to be used as multifunctional engineering materials in industrial applications.